Product Description:
The joint is designed for screened single core or three core
polymeric insulated MV cables up to 35kV.
Stress control tube,together with stress relief mastic,is used to
smooth out the electrical field at the cable screen ends.Heat
shrink insulation tube delivers consistent insulation thickness
over the core insulation.
Heat shrink dual layer tube is adopted to help ensure a void-free
interface between the insulation and screen. Copper mesh wrapped
around the joint area rebuilds the metallic screen.Either soldering
or solderless earth connection is available to provide screen
continuity across the joint.The outer sealing and protection is
performed by an adhesive coated heat shrink tube.
Features:
1.Electrical stress control
Stress control tube,together with stress relief mastic,is used to
smooth out the electrical field at the cable screen ends.
2.Insulation and screen
Heat shrink insulation tube delivers consistent insulation
thickness to meet or exceed that of the cable. Heat shrink
semi-conductive /insulation dual layer tube is also adopted to help
ensure a void-free interface between the insulation and screen.
3.Metallic shielding
Copper mesh wrapped around the joint area rebuilds the metallic
screen.Either soldering or solderless earth connection is available
to provide screen continuity across the joint.
4.Outer sealing and protection
The outer sealing and protection is performed by an adhesive
coated,heat shrink tube.It provides mechanical protection and
chemical resistance as expected from cable oversheath.
• Manufactured from cross-linked polyolefin
• Flame-retardant breakouts are available upon customer request
• Meeting with varieties of configuration requirements
• Shrink temperature: start at 90°C, and fully recovered at 130°C.
Selection Table:
RSJY-1 Straight joint for screened,1-core polymeric insulated cables
6kV,10kV,20kV,30kV and 35kV
The joint is designed for screened single core polymeric insulated
MV cables up to 35kV.
| Nominal voltage U0,/U(Um) | Cross section(mm2) | Kit No. | L |
| Dimensions(mm) |
| 3.6/6(7.2)kV | 25-50 | 6kVRSJY-1/1 | 820 |
| 70-120 | 6kVRSJY-1/2 | 820 |
| 150-240 | 6kVRSJY-1/3 | 820 |
| 300-400 | 6kVRSJY-1/4 | 820 |
| 500-630 | 6kVRSJY-1/5 | 820 |
| 800-1000 | 6kVRSJY-1/6 | 820 |
| 1200 | 6kVRSJY-1/7 | 820 |
6/10(12)kV
6.35/11(12)kV
8.7/15(17.5)kV | 25-50 | 10kVRSJY-1/1 | 820 |
| 70-120 | 10kVRSJY-1/2 | 820 |
| 150-240 | 10kVRSJY-1/3 | 820 |
| 300-400 | 10kVRSJY-1/4 | 820 |
| 500-630 | 10kVRSJY-1/5 | 820 |
| 800-1000 | 10kVRSJY-1/6 | 820 |
| 1200 | 10kVRSJY-1/7 | 820 |
| 12/20(24)kV 12.7/22(24)kV | 35-50 | 20kVRSJY-1/1 | 820 |
| 70-120 | 20kVRSJY-1/2 | 820 |
| 150-240 | 20kVRSJY-1/3 | 820 |
| 300-400 | 20kVRSJY-1/4 | 1020 |
| 500-630 | 20kVRSJY-1/5 | 1020 |
| 800-1000 | 20kVRSJY-1/6 | 1020 |
| 1200 | 20kVRSJY-1/7 | 1020 |
18/30(36)kV
19/33(36)kV | 35-50 | 30kVRSJY-1/1 | 1100 |
| 70-120 | 30kVRSJY-1/2 | 1100 |
| 150-240 | 30kVRSJY-1/3 | 1100 |
| 300-400 | 30kVRSJY-1/4 | 1100 |
| 500-630 | 30kVRSJY-1/5 | 1100 |
| 800-1000 | 30kVRSJY-1/6 | 1100 |
| 1200 | 30kVRSJY-1/7 | 1100 |
| 20.8/36(42)kV | 50 | 35kVRSJY-1/1 | 1100 |
| 70-120 | 35kVRSJY-1/2 | 1100 |
| 150-240 | 35kVRSJY-1/3 | 1100 |
| 26/35(42)kV | 35kVRSJY-1/4 | 1160 |
| 500-630 | 35kVRSJY-1/5 | 1160 |
| 800-1000 | 35kVRSJY-1/6 | 1160 |
| 1200 | 35kVRSJY-1/7 | 1160 |
Note:
1.Connectors need to be ordered separately.
2.RSJY-1 is for cables with copper wire screen without armour.
3.Solderless earth connection have to be ordered separately as
follows:
·For cables with copper wire screen and wire armour,add
suffix-WA.For example,6kVRSJY-1/1-WA.
·For cables with copper tape screen with armour wire,add
suffix-X.For example,6kVRSJY-1/1-X.
RSJY-3 Straight joint for screened,3-core polymeric insulated cables
6kV,10kV,20kV,30kV and 35kV
The joint is designed for screened three core polymeric insulated
MV cables up to 35kV.
| Nominal voltage U0,/U(Um) | Cross section(mm2) | Kit No. | L |
| Dimensions(mm) |
| 3.6/6(7.2)kV | 25-50 | 6kVRSJY-3/1 | 1620 |
| 70-120 | 6kVRSJY-3/2 | 1620 |
| 150-240 | 6kVRSJY-3/3 | 1620 |
| 300-400 | 6kVRSJY-3/4 | 1620 |
| 500-630 | 6kVRSJY-3/5 | 1620 |
6/10(12)kV
6.35/11(12)kV
8.7/15(17.5)kV | 25-50 | 10kVRSJY-3/1 | 1620 |
| 70-120 | 10kVRSJY-3/2 | 1620 |
| 150-240 | 10kVRSJY-3/3 | 1620 |
| 300-400 | 10kVRSJY-3/4 | 1620 |
| 500-630 | 10kVRSJY-3/5 | 1620 |
| 12/20(24)kV 12.7/22(24)kV | 35-50 | 20kVRSJY-3/1 | 1620 |
| 70-120 | 20kVRSJY-3/2 | 1620 |
| 150-240 | 20kVRSJY-3/3 | 1620 |
| 300-400 | 20kVRSJY-3/4 | 2320 |
| 500-630 | 20kVRSJY-3/5 | 2320 |
18/30(36)kV
19/33(36)kV | 35-50 | 30kVRSJY-3/1 | 2520 |
| 70-120 | 30kVRSJY-3/2 | 2520 |
| 150-240 | 30kVRSJY-3/3 | 2520 |
| 300-400 | 30kVRSJY-3/4 | 2520 |
| 500-630 | 30kVRSJY-3/5 | 2520 |
| 20.8/36(42)kV | 50 | 35kVRSJY-3/1 | 2520 |
| 70-120 | 35kVRSJY-3/2 | 2520 |
| 150-240 | 35kVRSJY-3/3 | 2520 |
| 26/35(42)kV | 35kVRSJY-3/4 | 2620 |
| 500-630 | 35kVRSJY-3/5 | 2620 |
Note:
1.Connectors need to be ordered separately.
2.RSJY-3 is for cables with copper wire screen without armour.
3.Solderless earth connection have to be ordered separately as
follows:
·For cables with copper wire screen and wire armour,add
suffix-WA.For example,6kVRSJY-3/1-WA.
·For cables with copper tape screen with armour wire,add
suffix-X.For example,6kVRSJY-3/1-X.
Applications:
Stress control tube,together with stress relief mastic,is used to
smooth out the electrical field at the cable screen ends.
Heat shrink insulation tube delivers consistent insulation
thickness over the core insulation.
Heat shrink dual layer tube is adopted to help ensure a void-free
interface between the insulation and screen.
Copper mesh wrapped around the joint area rebuilds the metallic
screen.
Either soldering or solderless earth connection is available to
provide screen continuity across the joint.
The outer sealing and protection is performed by an adhesive coated
heat shrink tube.
Customization:
Customized logo
Min. order: 10
Customized packaging
Min. order: 10
Graphic customization
Min. order: 10
Packaging and delivery
Packaging Details: According to the tubing's size
Packing size:46*46*45cm
Port: Any port in China
FAQ
Professional Production Quality is Reliable
Q1 . Which certifications or test reports do you have?
A : We have UL,ROHS and REACH.
Q2 . How to ship my order? Is it safe?
A : For small package, we will send it by Express,such as Fedex,
UPS,TNT, DHL and so on.
For big packages, we will send them by Air or By sea or by Train.
We will use good packing and ensure the safety. We will be
responsible to any product damage caused on delivery.”
Q3 . What about your delivery time?
A : We have a lot of products in stock. We can send the stock
products in 3 work days.
If without stock,or stock is not enough, we will check the delivery
time with you.” (Usually is 3-7days).
Q4 . Can you provide samples? Are the samples free?
A : Yes. We can provide samples.
Usually for our standard products with stock, we can supply samples
free for testing.
Q5 . Could I put my own logo on it?
A : Sure, of course, we are a professional manufacture and have
over 10 years OEM experience.
