Product Description:
Adhesive-lined heavy wall heat shrinkable tubing is produced by
high quality polyolefin and hot melt adhesive through doublelayer
co-extrusion process. The outer layer of this tube has high physical and chemical properties, and good contraction, and so on.
Adhesive-lined heavy wall heat shrink tubing insulates and protects
electrical splice and terminations where maximum flame retardancy
and exceptional insulating and sealing characteristics are
required.
Features:
- 3:1 shrink ratio
- Excellent waterproof, moisture proof , sealing and insulating
performance
- Flame Retardant
- Anti-UV light
- Will not split or rupture during installation, when overheated
- Continuous operating temperature: -45℃ to 125℃
- Fully shrink temperature: 125℃
- Thermoplastic adhesive liner for complete environmental protection
and insulation
- Standard color: Black
10.Environmental standards: RoHS
11. Withstands severe mechanical requirements
12. Rated for 600V,90℃,continuous use
Applications:
Flame retardant heavy wall heat shrink tubing with adhesive has the
advantages of good insulation sealing, waterproof, mechanical wear
resistance, moisture resistance and anti-beating performance. It is
mainly used for insulation protection of middle and terminal joints
of high voltage cables with flame retardant requirements,
insulation protection of various bus bars, and anti-corrosion and
wear resistance of various pipelines.
Dimensions:
| Size | Expanded(mm) | After Recovery(mm) | Standard Package |
| mm | Inter Diameter | Inter Diameter | Jacket Thickness | Adhesive Thickness | Total Wall Thickness | (M/pc) |
| 9.0/3.0 | ≥9.0 | ≤3.0 | 2.0±0.20 | 0.35±0.10 | 2.30±0.25 | 1.22 |
| 13.0/4.0 | ≥13.0 | ≤4.0 | 2.4±0.20 | 0.35±0.10 | 2.75±0.25 | 1.22 |
| 20.0/6.0 | ≥20.0 | ≤6.0 | 2.5±0.20 | 0.40±0.10 | 2.90±0.25 | 1.22 |
| 28.0/9.0 | ≥28.0 | ≤9.0 | 2.5±0.20 | 0.40±0.10 | 2.90±0.25 | 1.22 |
| 33.0/10.2 | ≥33.0 | ≤10.2 | 3.2±0.25 | 0.40±0.10 | 3.60±0.25 | 1.22 |
| 38.1/12.0 | ≥38.1 | ≤12.0 | 3.4±0.20 | 0.60±0.15 | 4.00±0.35 | 1.22 |
| 43.2/12.7 | ≥43.2 | ≤12.0 | 4.3±0.20 | 0.70±0.35 | 5.00±0.35 | 1.22 |
| 51.0/16.0 | ≥55.0 | ≤16.0 | 4,3±0,20 | 0.70±0.35 | 5.00±0.35 | 1.22 |
| 70.0/21.0 | ≥75.0 | ≤22.0 | 4.3±0.20 | 0.70±0.35 | 5.00±0.35 | 1.22 |
| 85.0/25.0 | ≥85.0 | ≤25.0 | 4.3±0.20 | 0.70±0.35 | 5.00±0.35 | 1.22 |
| 105.0/30.0 | ≥105.0 | ≤30.0 | 4.3±0.20 | 0.80±0.35 | 5.10±0.35 | 1.22 |
| 120.0/36.0 | ≥120.0 | ≤36.0 | 4.3±0.20 | 0.50±0.35 | 5.10±0.35 | 1.22 |
| 130.0/36.0 | ≥130.0 | ≤36.0 | 4.3±0.20 | 0.60±0.35 | 5.10±0.35 | 1.22 |
| 140.0/42.0 | ≥140.0 | ≤42.0 | 4.3±0.20 | 0.60±0.35 | 5.10±0.35 | 1.22 |
Technical Data:
| Property | Test Method | Stantard |
| Tensile Strength(Mpa) | ASTM D2671 | ≥10.4 |
| Elongation(%) | ASTM D2671 | ≥300 |
| Density(g/cm) | ASTM D792 | 1.2 |
| Longitudinal change(%) | UL224 | ≤±10 |
| Elongation after aging(%) | UL224 158℃X168hrs | ≥200 |
| Heat shock | UL224 225℃X4hrs | No cracking |
| Dielectric strength(kv/mm) | IEC 60243 | ≥20 |
| Volume resistivity(a·cm) | IEC 60093 | ≥1×10^14 |
| Water absorption(%) | ASTM-D570 | ≤0.5 |
Hot Melt Adhesive Property:
| Property | Test Method | Standard |
| Water Absorption | ASTM D570 | <0.2% |
| Sofening Point(℃) | ASTM E28 | 85 |
| Strength of pearing(PE) | ASTM D 1000 | 120N/25mm |
| Strength of pearing(AL) | ASTM D 1000 | 80N/25mm |
Shipping:
Depending on the customer's location, we offer various shipping
options to choose from, including air, sea, and land
transportation. Our team carefully monitors the shipping process to
ensure that our products are delivered on time and in excellent
condition.
For international orders, we take necessary steps to comply with
customs and import regulations to avoid any delays or additional
charges for our customers. We also provide tracking information for
our customers to keep them updated on the delivery status of their
order.
FAQ:
Professional Production Quality is Reliable
Q1 . Which certifications or test reports do you have?
A : We have UL,ROHS and REACH.
Q2 . How to ship my order? Is it safe?
A : For small package, we will send it by Express,such as Fedex,
UPS,TNT, DHL and so on.
For big packages, we will send them by Air or By sea or by Train.
We will use good packing and ensure the safety. We will be
responsible to any product damage caused on delivery.”
Q3 . What about your delivery time?
A : We have a lot of products in stock. We can send the stock
products in 3 work days.
If without stock,or stock is not enough, we will check the delivery
time with you.” (Usually is 3-7days).
Q4 . Can you provide samples? Are the samples free?
A : Yes. We can provide samples.
Usually for our standard products with stock, we can supply samples
free for testing.
Q5 . Could I put my own logo on it?
A : Sure, of course, we are a professional manufacture and have
over 10 years OEM experience.
